1. 毕业设计（论文）的内容和要求

（1）查找相关资料及文献，熟悉和掌握微小孔电火花-电解复合加工方法；（2）熟悉微小孔复合加工设备，制定微小孔复合加工设备设计方案；（3）根据工艺需要，开展微小孔电火花-电解复合加工流场、温度场仿真；（4）写毕业设计报告、完成机械图纸设计及英文翻译。

2. 参考文献

[1] Bilgi DS, Jain VK, Shekhar R, Mehrotra S (2004) Electrochemical deep hole drilling in super alloy for turbine application. J Mater Process Technol 149(1-3): 445-452. [2] Liu K, Yang SF, Han JC (2014) Influence of Coolant Density on Turbine Blade Film-Cooling With Axial and Compound Shaped Holes. J Heat Trans-T ASME 136(4):1-5. [3] Fang XL, Qu NS, Li HS, Zhu D (2013) Enhancement of insulation coating durability in electrochemical drilling. Int J Adv Manuf Technol: 1-9. [4] Ferraris E, Castiglioni V, Ceyssens F, Annoni M, Lauwers B, Reynaerts D (2013) EDM drilling of ultra-high aspect ratio micro holes with insulated tools. Ann CIRP 62(1): 191-194. [5] Li JZ, Shen FH, Yu ZY, Natsu W (2013) Influence of microstructure of alloy on the machining performance of micro EDM. Surf Coat Tech 228 (1): 460-S465. [6] Hao Ning C, Wang JJJ (2011) An analysis of overcut variation and coupling effects of dimensional variable in EDM process. Int J Adv Manuf Technol 55(9-12): 935-43. [7] Wang CC, Chow HM, Yang LD, Lu CT (2009) Recast layer removal after electrical discharge machining via Taguchi analysis: A feasibility study. J Mater Process Technol 209(8): 4134-4140. [8] Cusanelli G, Hessler-Wyser A, Bobard F, Demellayer R, Perez R, Fl#252;kiger R (2004) Microstructure at submicron scale of the white layer produced by EDM technique. J Mater Process Technol 149(1): 289-295. [9] Lee HT, Tai TY (2003) Relationship between EDM parameters and surface crack formation. J Mater Process Technol 142(3): 676-683. [10] McGeough JA, Khayry ABM, Munro W, Crookall JR (1983) Theoretical and experimental investigation of the relative effects of spark erosion and electrochemical dissolution in electrochemical arc machining. Ann CIRP 32(1): 113-118. [11] Kurita T, Hattori M (2006) A study of EDM and ECM/ECM-lapping complex machining technology. Int J Mach Tool Manuf 46(14): 1804-1810. [12] Chung DK, Shin HS, Kim BH, Park MS, Chu CN (2009) Surface finishing of micro-EDM holes using deionized water. J Micromech Microeng 19(4): 1-7. [13] Ramasawmy H, Blunt L, Rajurkar K (2005) Investigation of the relationship between the white layer thickness and 3D surface texture parameters in the die sinking EDM process. Precis Eng 29(4): 479-490. [14] Zeng Z, Wang Y, Wang Z, Shan D, He X (2012) A study of micro-EDM and micro-ECM combined milling for 3D metallic micro-structures. Precis Eng 36(3): 500-509. [15] Klocke F, Klink A, Veselovac D, Aspinwall DK, Soo SL, Schmidt M, Schilp J, Levy G, Kruth JP (2014) Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes. Ann CIRP 63(2): 703-726. [16] Zhu D, Wang W, Fang X, Qu N, Xu Z (2010) Electrochemical drilling of multiple holes with electrolyte-extraction. Ann CIRP 59(1): 239-242. [17] Lauwers B, Klocke F, Klink A, Tekkaya AE, Neugebauer R, McIntosh D (2014) Hybrid processes in manufacturing. Ann CIRP 63(2): 561-583. [18] Nguyen MD, Rahman M, Wong YS (2012) Simultaneous micro-EDM and micro-ECM in low-resistivity deionized water. Int J Mach Tool Manuf 54: 55-65.

3. 毕业设计（论文）进程安排

1、2018.12.20-2018.12.29: 查阅文献，熟悉课题背景，做好开题前期工作。

2、2018.12.29-2019.1.13: 在广泛查阅资料的基础上，完成外文翻译、文献综述和开题报告等工作。

3、2019.1.13-2019.3.12: 进行课题的机床图纸绘制等。