1. 毕业设计（论文）的内容和要求

主要内容包括： 具体安排：第一周：文献查阅 查阅相关的文献，要求学习并掌握利用中国期刊网、web of science、ei、elsevier等查阅文献，不少于20篇。

第二周：英文文献的翻译，文献字数3000字以上 要求掌握专业英语翻译。

第三周：开题：完成开题报告，结合任务书确定研究方向。

2. 参考文献

[1] 汤静芳, 聚苯乙烯/苄基木粉复合材料的染色研究. [J] 中国塑料, 2014(10): 29-35. [2] 李行温, 马来酸酐接枝PS相容剂的研究. [J]合成树脂及塑料, 2003(05): 12-14 42. [3] Farsi, M., Effect of Nano-SiO2 and Bark Flour Content on the Physical and Mechanical Properties of Wood#8211;Plastic Composites. [J] Journal of Polymers and the Environment, 2017. 25(2): 308-314. [4] 张彰, 孙丰文与张茜, 酯化、醚化改性对木材热性能的影响. [J]南京林业大学学报（自然科学版）, 2009. 33(6): 6-10. [5] 黄慧, 酯化处理对竹材结构及热性能的影响. [J] 林业科技开发, 2014(04):105-108. [6] Migneault, S., et al., Effects of wood fiber surface chemistry on strength of wood#8211;plastic composites. [J] Applied Surface Science, 2015. 343: 11-18. [7] 刘如, 曹金珍与彭尧, 木粉组分对木塑复合材料性能的影响研究进展. [J] 化工进展, 2014(08): 2072-2083. [8] Mertens, O., K. Christian Krause and A. Krause, Evaluation of wood fiber composites based on a novel simultaneous defibration and compounding process. [J] Journal of Applied Polymer Science, 2018. 135(7): 45859. [9] Gwon, J.G., et al., Physical and mechanical properties of wood-plastic composites hybridized with inorganic fillers. [J] JOURNAL OF COMPOSITE MATERIALS, 2012. 46(3): 301-309. [10] Zabihzadeh, S.M., et al., Physical and Mechanical Properties of Rapeseed Waste-filled LLDPE Composites. [J] JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2011. 24(4): 447-458. [11] 王海燕等, KH550硅烷偶联剂对复合材料结构和介电性能影响. [J]功能材料, 2006(07):1091-1093 1097. [12] Stark, N.M. and L.M. Matuana, Characterization of weathered wood#8211;plastic composite surfaces using FTIR spectroscopy, contact angle, and XPS. [J]Polymer Degradation and Stability, 2007. 92(10): 1883-1890. [13] Guo, J., Y. Tang and Z. Xu, Wood Plastic Composite Produced by Nonmetals from Pulverized Waste Printed Circuit Boards. [J]Environmental Science Technology, 2010. 44(1): 463-468. [14] Sofina-E-Arab and M.A. Islam, Production of mahogany sawdust reinforced LDPE wood-plastic composites using statistical response surface methodology. [J] JOURNAL OF FORESTRY RESEARCH, 2015. 26(2): 487-494. [15] Yang, H., et al., Characteristics of hemicellulose, cellulose and lignin pyrolysis. [J]Fuel, 2007. 86(12-13): p. 1781-1788. [16] 张洪吉等, 超临界二氧化碳/乙醇发泡体系制备聚苯乙烯微孔发泡材料. [J]塑料, 2010(05):55-57 54. [17] 翟文涛, 余坚与何嘉松, 超临界流体制备微发泡聚合物材料的研究进展. [J] 高分子通报, 2009(03):1-10. [18] 殷小春与任鸿烈, 对改善木塑复合材料表面相容性因素的探讨. [J]塑料, 2002(04): 25-28 24. [19] Farsi, M., Wood-plastic composites: influence of wood flour chemical modification on the mechanical performance. [J] JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2010. 29(24): 3587-3592. [20] GAO, L., et al., Flammability properties of wood fiber-recycled plastic composite. [J] Journal of Beijing Forestry University, 2007( 29): 176-180. [21] Muszynski, L., IMAGING WOOD PLASTIC COMPOSITES (WPCs): X-RAY COMPUTED TOMOGRAPHY, A FEW OTHER PROMISING TECHNIQUES, AND WHY WE SHOULD PAY ATTENTION. [J]BIORESOURCES, 2009. 4(3): 1210-1221. [22] Stark, N.M. and L.M. Matuana, Characterization of weathered wood#8211;plastic composite surfaces using FTIR spectroscopy, contact angle, and XPS. [J]Polymer Degradation and Stability, 2007. 92(10): 1883-1890. [23] Nahar, S., et al., Comparative Studies of Mechanical and Interfacial Properties between Jute and Bamboo Fiber-Reinforced Polypropylene-Based Composites. [J]JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2012. 25(1): 15-32.

3. 毕业设计（论文）进程安排

起讫日期 设计（论文）各阶段工作内容 备 注 2018.12-2019.1 查阅文献 2019.1-2019.2 翻译英文文献、开题 2019.2-2019.4 利用亚临界流体挤出法制备PS基木塑复合材料，研究不同含量的氢氧化钠做共溶剂对复合材料力学性能的影响 2019.4-2019.5 论文中期检查 2019.5-2019.6 1、进行复合材料的力学性能测试 2、对聚苯乙烯基木塑复合材料进行红外分析 3、进行扫描电镜分析 2019.6-2019.7 撰写论文，完成答辩