论文总字数：15623字

摘 要

涤纶是化纤工业中产量高、用途广的的一类品种。随着化纤技术的发展，涤纶长丝织物在面料市场中的应用也越来越多，同时，随着环保政策的提高及工厂对成本、产品附加值的关注，印染厂设计的重要性也越来越彰显。

印染厂设计是衡量全面知识的一个课题，也是投资前进行调查、编写项目可行性报告的一个重要内容，合理的设计方案对以后的印染厂升级、改造、竞争都十分有利。本文主要以年产5000万米涤纶长丝织物印染厂为主题进行设计，主要内容包括涤纶长丝织物的品种选择、工艺流程确定、设备型号选择及所需配置的设备台数、计算等内容，并完成主生产车间设备平面布置图一张。

关键词：涤纶长丝织物 设计 工艺流程 设备配置 车间平面布置图

Design of 50 Million Meters/ year Polyester Filament Fabric Printing and Dyeing Factory

Abstract

Polyester fiber is a kind of variety with high yield and wide application in chemical fiber industry. With the development of measure the comprehensive knowledge, it is also an important part of the investment before the investigation and the preparation of the project feasibility report. A good design is very chemical fiber technology, more and more polyester filament fabric has been applied in the shell fabric market. At the same time, with the improvement of the environmental protection policy and the attention that factory pays to the cost, product added value, the printing and dyeing plant design is becoming more and more important.

The design of printing and dyeing factory is a subject to advantageous to printing and dyeing factory upgrade, transformation and competition. In this paper, the main design was 50 million meters annual output of polyester filament fabric printing and dyeing factory. The main contents included variety selection of polyester filament fabric, process determination, equipment model selection and calculation. The equipment layout of main product workshop plan had been completed.

Key Words: polyester filament fabric; design; process; equipment configuration; equipment layout of main product workshop

目 录

摘要………………………………………………………………………………………………I

ABSTRACT……………………………………………………………………………………II

第一章 文献综述 ……………………………………………………………………………1

1.1概述……………………………………………………………………………………… 1

1.2 涤纶长丝织物……………………………………………………………………………2

1.2.1 涤纶长丝织物的定义……………………………………………………………2

1.2.2 涤纶长丝的发展及应用…………………………………………………………2

1.3 印染工厂设计一般流程…………………………………………………………………3

1.3.1 工艺设计原则……………………………………………………………………3

1.3.2 印染厂厂址选择原则……………………………………………………………4

1.3.3 车间布局及分配原则……………………………………………………………5

第二章 年产5000万米涤纶长丝织物印染厂工艺设计 ……………………………6

2.1 产品方案的确定…………………………………………………………………………6

2.1.1 产品方案确定的依据……………………………………………………………6

2.1.2 产品品种和规格…………………………………………………………………6

2.2 工艺设计…………………………………………………………………………………8

2.2.1 工艺流程的选择原则……………………………………………………………8

2.3 设备选型及配置…………………………………………………………………………9

2.3.1 设备选择原则……………………………………………………………………9

2.3.2 设备的计算及配置 ……………………………………………………………11

2.4 主生产车间平面布置 …………………………………………………………………13

2.5 分间面积计算 …………………………………………………………………………14

2.6印染厂附房 ……………………………………………………………………………14

1. 小结与展望 ………………………………………………………………………16

3.1 结论 ……………………………………………………………………………………16

3.2 展望 ……………………………………………………………………………………16

参考文献………………………………………………………………………………………17

致谢 ……………………………………………………………………………………………19

请支付后下载全文，论文总字数：15623字