1. 毕业设计（论文）的内容和要求

论文内容主要有：一、任务书的认真阅读二、参考文献的查阅，完成文献综述；三、英文文献的翻译；四、CAD图绘制；五、试验研究；六、完成论文。

论文主要要求有：一、 毕业论文严格按照时间进度进行；二、 每周与导师交流3次，有问题及时解决；三、英文文献的翻译独立完成，不得使用翻译软件；四、CAD图绘制独立完成，不得拷贝其他人的CAD文件。

2. 参考文献

[1] Jipeng Ye. Novel Nanoindentation Techniques and Their Applications[M], in ”Applied Scanning Probe Methods X”, eds by Springer Berlin Heidelberg: New York. 2007: 309-345 [2] International Organization for Standardization(ISO). Metallic Materials-- Instrumented Indentation Test for Hardness and Materials Parameters [S]. ISO/Draft International Standard No. 14577; 2001. [3] Fischer-Cripps, A.C. Critical Review of Analysis and Interpretation of Nanoindentation Test Data[J]. Surface Coating Technology, 2006, 200: 4153-4165. [4] Fischer-Cripps, A.C. Nanoindentation[M]. Springer: New York, 2004. [5] Oliver W.C., Pharr G.M.. An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments[J]. Journal of Materials Research, 1992, 7(6): 1564-1583 [6] Suresh S., Giannakopoulos A.E.. A New Method for Estimating Residual Stresses by Instrumented Sharp Indentation [J]. Acta Mater., 1998, 46:5755-5767 [7] Yan J., Chen X. and Karlsson A.M.. Determining Equi-biaxial Residual Stress and Mechanical Properties From the Force-displacement Curves of Conical Microindentation[J]. Journal of engineering Materials and Technology, 2007, 129(4): 200-206 [8] Wadener J.G., Taljat B., Pharr G.M.. Measurement of Residual STress by Load and Depth Sensing Indentation with Spherical Indenters[J]. Journal of Materials Research. 2001, 16(7): 2091-2102 [9] Wang Q. and Ozaki K.. Effect of Surface Stress on the Load-depth Curves of Depth-sensing Indentation[J]. Mater. Res. Soc. Symp. Proc. 2005, v481: R9.4.1-R9.4.5 [10] Suresh S., Giannakopoulos A.E.. A New Method for Estimating Residual Stresses by Instrumented Sharp Indentation [J]. Acta Mater., 1998, 46:5755-5767. [11] 章莎, 黄勇力, 赵冠湘, 周益春. 纳米压痕法测量电沉积镍镀层的残余应力[J]. 湘潭大学自然科学报，2006, 28(1): 50-53 [12] Giannakopoulos A.E. and Suresh S.. Determination of Elastoplastic Properties by Instrumented Sharp Indentation[J]. Scripta Materialia, 1999, 40(10): 1191#8211;1198 [13] Lee Yun-Hee, Kwon Dongil. Residual stresses in DLC/Si and Au/Si systems: Application of a stress-relaxation model to the nanoindentation technique[J]. Journal of Materials Research, 2002, 17(4): 901-906 [14] Tsui T Y ., Oliver W C. and Pharr G.M.. Influence of Stress on the Measurement of Mechanical Properties Using Nanoindentation: Part I. Experimental Studies in an Aluminum alloy[J], J. Mater. Res., 1996,11:752#8211;759 [15] Wang Q., Ozaki K., Ishikawa H., et al. Indentation Method to Measure the Residual Stress Induced by Ion Implantation[J]. Nuclear Instruments and Methods in Physics Research B, 2006, 242: 88-92 [16] L R Klueh and J F King. Autenitic stainless steel-ferritic steel weld joint failures [J]. Welding J., 1982, 61, 302s-311s [17] D I Roberts, R H Ryder and R Viswannathan. Performance of dissimilar welds in service. Trans. ASME, J. Pres. Ves. Technol., 1985, 107, 247-254 [18] 黄明亮，王来，等.异质焊头 Cr5Mo/Cr21Ni12 碳扩散的研究[J].金属学报，2000,36（9）：902-906.

3. 毕业设计（论文）进程安排

见附件