残余应力对装甲车车身成型性影响分析和仿真设计开题报告
2022-01-04 21:25:17
全文总字数：10516字
1. 研究目的与意义（文献综述）
1．purpose and significance (including analysis ofresearch status at home and abroad)
1.1 purpose and significance
cold-formedsteel is made of hot-rolled or cold-rolled steel sheet as raw material andprocessed by roll-bending at normal temperature to produce variouscross-sectional shapes. cold-formed steel itself has many advantagessuch as uniform cross-section, low energy consumption and high economicbenefits. at the same time, it has high versatility and safety. therefore,armored car bodies are increasingly using high-strength cold-formed steel.
2. 研究的基本内容与方案
2． basic content, goals,proposed technical solutions and measures of research (design)
2.1 basic content ofdesign
thebasic content of this graduation design is to establish a finite element modelof the armored vehicle body through finite element software, to performdifferent forms of bending loading on the model, and to study its deformationunder different forms of loading. then, different types and sizes of residualstress values are assigned to the abaqus body model, and the effects ofdifferent residual stress values on the forming performance are analyzed by themodel. by simulating the loading in different situations, the cold bendingmodel of the armored steel was optimized.
3. 研究计划与安排
| （2019.12.25 -2020.2.23） | Consult relevant literature andlearn the operation of Abaqus software |
| （2.24-3.1） | Complete and submit the literaturereview and opening report |
| （3.2-3.15） | Complete the literature translationand consult more papers |
| （3.16-3.22） | Establish the steel sheet and rollsfinite element model |
| （3.23-4.14） | Roll-forming simulation for thesteel sheet without initial residual stress |
| （4.15-4.30） | Roll-forming simulation for thesteel sheet with initial residual stress |
| （5.1-5.31） | Complete the drawings and papers ofgraduation project and submit them to the tutor forrevising |
| （6.1-6.8） | Prepare for graduation projectpresention |
4. 参考文献（12篇以上）
[1] 赵峰,郭耀杰.冷弯残余应力场分析[j].工业建筑,2004(06):71-73 64.
[2] 郭盛,郭耀杰.冷弯残余应力场研究[j].钢结构,2003(05):42-44.
[3] 陶晓庆. 充压冷弯工艺对薄壁管弯曲加工应力的影响研究[d].西安科技大学,2015.
